PROMAT Cutting tip GFN 3.1 MS35

For slicing off and cutting Further technical information:
– a: 3.1mm
– tol. a +/-: 0,04mm
– b: 2.6mm
– re: 0,2mm
– Max. feed rate: 0.2 mm/rev in steel / 0.15 mm/rev in stainless steel / 0.2 mm/rev in cast / 0.2 mm/rev in NI metals / 0.12 mm/rev in superalloys
– Vc max.: 180 m/min in steel / 105 m/min in stainless / 170 m/min in cast / 630 m/min in NI metals / 50 m/min in superalloys / 35 m/min in hardened steels
– Vc min.: 95 m/min in steel / 55 m/min in stainless / 90 m/min in cast / 140 m/min in NI metals / 15 m/min in superalloys / 15 m/min in hardened steels
– Min. cutting depth: 0.3m/min in hardened steels
– Max. cutting depth: 1.5m/min in hardened steels
– Min. feed rate: 0.08 mm/rev in steel / 0.08 mm/rev in stainless steel / 0.08 mm/rev in cast / 0.08 mm/rev in NI metals / 0.08 mm/rev in superalloys